Military Generator 3 KVA - G3M

  • The Multi Compartment Control Box receives the detection signals from the engine, crew and other protected compartments and activates the fire extinguishing system.
  • Microprocessor based electronics, enable flexibility to fit specific system configurations and operating logic. The control panel includes indications and warning signals, manual activation and system test features.

General Features

  • High speed response- less than 6 msec
  • Indication and warning signals
  • Accepts input signals from optical detectors, thermocouples and thermal wire
  • Overheat indication for engine compartment
  • Activates engine and crew compartments
  • Integral direct manual activation
  • Accepts external manual activation inputs
  • Automatic and manual Built In Test (BIT)
  • Stanag 4317 compatible
  • MTBF minimum 140,000 hours
  • Power Supply : 24 VDC nominal (16-32V)
  • Power Consumption : 170 mA @ 24 VDC
  • Operating Temperature : -40°C to + 71°C
  • Storage Temperature : -50°C to + 85°C
  • Weight : 1880 gr ± 200 gr (Depends on Config)
  • Dimensions WxDxL: 240 x 81 x 153 mm (±5 mm)
  • IPC A-610 Class-3 Produced PCB
  • IP67 Water and dust ingress protection
  • Salt spray test resistance 800 hours
  • MIL-STD-810G ,MIL-STD-461G, MIL-STD-1275E
  • UL, CE GOST-R Certification

6 Detectors for Ares I (programmable function)
8 Detectors for Ares II (programmable function)
6 Cylinders
Double Shot Features ( Crew and Engine )
Manual buttons provide activation independently from electronic system
datalog can be done with Stanag 4317

3 Input
-Input 1 : Vehicle Ignition Switch ( ‘NO’ contact, switching either to battery (+) )
-Input 2 : Blackout Input ( ‘NO’ contact, switching either to battery (-) )
-Input 3 : Emergency Input ( ‘NO’ contact, switching either to battery (-) )

2 Output (250mA 24V DC)
-Output 1 : Engine Fire Alarm ( 250mA @ 24VDC )
-Output 2 : Crew Fan Controller ( 250mA @ 24VDC )