ARES-M3 CONTROL UNITS

  • The Multi Compartment Control Box receives detection signals from the engine protected compartments and activates the fire extinguishing system.
  • Microprocessor based electronics, enable flexibility to fit specific system configurations and operating logic. The control panel includes indications and warning signals, manual activation, system test features, modern CANBUS (J-1939) serial communication port enables connection to vehicle control system and can be used for maintenance and trouble-shooting.

General Features

  • High speed response- less than 6 msec
  • Indication and warning signals
  • Overheat indication for engine compartment
  • Activates engine compartment
  • Automatic extinguisher activation
  • Integral Direct Manual activation
  • Accepts external manual activation inputs
  • Accepts input signals from optical detectors, thermocouples and thermal wire
  • CANBUS (J-1939) compatible
  • MTBF minimum 140,000 hours
  • Power Supply : 24 VDC nominal (16-32V)
  • Power Consumption : 75 mA @ 24 VDC
  • Operating Temperature : -40°C to + 71°C
  • Storage Temperature : -50°C to + 85°C
  • Weight : 620 gr ± 50 gr (Depends on Config)
  • Dimensions WxDxL: 125 x 66 x 80 mm (±5 mm)
  • IPC A-610 Class-3 Produced PCB
  • IP67 Water and dust ingress protection
  • Salt spray test resistance 800 hours
  • MIL-STD-810G ,MIL-STD-461G, MIL-STD-1275E
  • UL, CE GOST-R Certification
  • 5 Detector ( programmable function )
  • 5 Cylinders ( programmable function )
  • Manual buttons provide activation independently from the electronic system datalog can be done with CANBUS.

2 Input

-Input 1 : Vehicle Ignition Switch ( ‘NO’ contact, switching either to battery (+) )

-Input 2 : Black Out Input ( ‘NO’ contact, switching either to battery (-) )

 

2 Output (250mA 24V DC)

-Output 1 : Engine Fire Alarm ( 250mA @ 24VDC )

-Output 2 : Configurable Digital Inputs ( ‘NO’ contact, switching either to battery (-) )